Automatic Shut-Off; Care And Maintenance; Troubleshooting - LeapFrog Speak & Learn Puppy 6101 Parents' Manual

9. Automatic Shut-Off

To preserve battery life, the Speak & Learn Puppy™ will
automatically enter sleep mode after approximately 45
seconds without input. The unit can be turned on again by
pressing any button.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from direct
heat sources.
3. Remove the batteries if the unit will not be in use for an
extended period of time.
4. Do not drop the unit on a hard surface and do not expose
the unit to moisture or water.

TROUBLESHOOTING

If for some reason the unit stops working or malfunctions,
please follow these steps:
1. Turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit On. The unit should now be ready to use again.
5. If the unit still does not work, install a new set of batteries.
8