Table of Contents
Advertisement
General Precautions
Handling Precautions
Do not leave the product in excessive heat such as
z
in a car in direct sunlight. High temperatures can
cause the product to malfunction.
If the lens is taken from a cold environment into a
z
warm one, condensation may develop on the lens
surface and internal parts. To prevent condensation
in this case, first put the lens into an airtight
plastic bag before taking it from a cold to warm
environment. Then take out the lens after it has
warmed gradually. Do the same when taking the
lens from a warm environment into a cold one.
The interior of the lens may appear to shake, but
z
this is not a malfunction and will not cause any
problems.
Please also read any lens related handling
z
precautions listed in your camera's instruction
manual.
Shooting Precautions
The lens uses a DO* lens. Colored flare might appear
around the light source depending on shooting
conditions, which is due to DO lens characteristics.
For scenes where a light source is inside the
z
screen, colored flare may occasionally appear as
a halo of light around the light source.
For scenes where a light source is outside the
z
screen, colored flare may occasionally appear
partially inside the screen. You can reduce or
prevent these issues with the following steps
according to the scene you are shooting.
• Use your hand or paneling, an umbrella, etc.
to block the light source and placed so that
they do not appear in the screen.
* "DO" stands for Diffractive Optics.
Use of a DO lens provides favorable correction of
chromatic aberration that occurs easily in super-telephoto
lenses, achieving a more compact and lightweight design
while providing good rendering capabilities.
ENG-3
Advertisement
Table of Contents
