Light Replacement; Cleaning And Maintenance - Electrolux Frigidaire 76F49-AM21 Install Instructions & User Manual

LIGHTING

LIGHT REPLACEMENT

Switch off the extractor hood and isolate the extractor hood by pulling out the

mains plug or switching off the fuse.
Remove the grease filter.

Replace the lamp (commercially) led modules,separate ballast.

Reconnect the power by inserting the mains plug or by switching on the fuse.


CLEANING AND MAINTENANCE

Disconnect range hood from power supply before cleaning or servicing.
Cleaning the surface of hood frequently. Use mild soap or detergent to clean the hood.

Do not use harsh alkalis or abrasives.

Avoid the use of scouring powers or dishwasher compounds.

Grease filter may be washed using mild soap or detergent. (Heavy grease build-up may

not be cleaned easily and the filter may require replacement).
Charcoal filter cannot be cleaned and must be replaced regularly.

Information
Cleaning water must not inter into motor, control switch etc. electrical parts.
It is recommendable to clean the metallic filter every three months by carrying out the following
instruction:
Remove the metallic filter from the cooker hood and wash it in asolution of water and neutral

liquid detergent, leaving to soak.
Rinse thoroughly with warm water and leave to dry.

The metallic filter may alter in color after several washes. This is notcause for customer

complaint or replacement of metallic filter.
12