VESA Wall Mount
Installation & Operation
1.
Select a mounting location that is convenient for operation.
2.
Remove the screw attaching the bracket to the chassis of the VESA 75 mount.
3.
For wall mounting, install the four plastic wall anchors in a wall and then secure the bracket of VESA 75 mount to the
wall using the four large screws. For countertop/shelf mounting, secure the bracket of VESA 75 mount to a
countertop/shelf using the four large screws.
4.
Complete all wire/cable connections to the NQuire.Secure the chassis of VESA 75 mount to the back of the NQuire using
the four small screws. Note that the depth of screw insertion into the NQuire must not exceed 4.5mm.
5.
Attach the bracket back to the chassis with the screw that was removed in step 2.
Chapter 2 Accessory & Installation
11