Table of Contents
Advertisement
DARLEY
Assembly
Tip: - When inserting L seat, apply Lanotec. This can help speed up the process and make the job easier.
- 4mm drain holes to be slotted in the bottom frame section. Red = Bottom Rail, Blue = Top Rail.
(1)
(2)
SCREENGUARD STAINLESS STEEL MESH SECURITY SYSTEM
Tip: After stainless steel mesh has been cut to size, corner
tips can be cut at 45 degrees. This will help with the
insertion of the mesh.
(3)
L seat is mitred in corners as per
frame.
(Ensure L seat is inserted correctly).
Insert Stainless Steel Mesh.
Sheet to be supported to prevent
distortion and to help wedge insertion.
Refer to Diagram (1).
Tap in wedge using our manual tool,
automatic air tool or pneumatic hand
tool. Refer to diagrams (2) and (3).
Tip 1: After the first wedge has
been inserted, check and measure
your door/window widths (top,
center, bottom and diagonals).
Tip 2: Keep your wedge in its
original condition, store on a flat
surface in a dry cool area.
Step 1
Step 2
Step 3
7
Advertisement
Table of Contents
