Porsche Cayenne 2005 Owner's Manual page 293

Wheel change
1. Remove the top wheel bolt with the wheel bolt
wrench from the tool kit.
WWW.MANUALS.WS
Screwing in assembly aid
2. Remove assembly aid from the tool kit and
screw in instead of the wheel bolt.
3. Remove the remaining wheel bolts.
Please observe the chapter "WHEEL BOLTS"
on Page 285.
4. Change wheel.
WWW.MANUALS.WS
5. Insert wheel bolts and tighten by hand. Re-
move assembly aid and screw in remaining
wheel bolt.
Initially tighten bolts in diagonally opposite se-
quence so that the wheel is centered.
6. Inflate the tire.
Please observe the chapter "TIRE PRESSU-
RES, COLD" on Page 350.
In vehicles with tire pressure monitoring sys-
tem:
Please observe the chapter "TIRE PRESSURE
MENU" on Page 87.
7. Lower car and remove jack.
8. Tighten wheel bolts in diagonally opposite se-
quence.
Maintenance note
f Immediately after changing a wheel, use
a torque wrench to check the prescribed
tightening torque of the wheel bolts
(118 ftlb./160 Nm).
Practical Tips, Minor Repairs
293