Porsche Cayenne 2005 Owner's Manual page 153

Table of Contents

Advertisement

E - Opens sliding/lifting roof element
completely
f Turn knob to switch position E.
f Roof element 3 will be opened completely.
The roller blind will open automatically to the
selected opening width.
Comfort function when locking/unlocking
the vehicle
f Hold the car key in the door lock in the
unlocking or locking position until the windows
and the Panorama roof system have reached
the desired position.
f On vehicles with Porsche Entry & Drive, keep
the button in the door lock pressed until the
windows and the Panorama roof system have
reached the desired position.
Force limiter for the Panorama roof
system
WWW.MANUALS.WS
All roof elements are equipped with a force limiter.
If the sliding roof or the sliding/lifting roof element
is obstructed during the closing or opening
process, the respective roof element opens or
closes again immediately.
Closing a roof element after triggering the
force limiter
1. Remove the obstruction.
2. Turn knob to position A again.
Electric emergency closing function
Warning!
Risk of injury from the emergency closing
function for the Panorama roof system. The
force limiter is not available and the roof
elements will close with full force.
f Take care to ensure that nobody can be injured
when the Panorama roof system is closing.
If the roof cannot be closed due to dirt, ice, or
similar substances:
1. Turn knob to position A.
2. Hold the knob in position A until all roof
elements are completely closed.
WWW.MANUALS.WS
Save final position of the Panorama roof
system
After disconnecting/reconnecting the vehicle
battery or if the vehicle battery is discharged, or
after emergency starting with jumper cables, the
final positions of the Panorama roof system are
lost.
Warning!
Risk of injury when closing the Panorama
roof system. The force limiter is not available
and the roof elements will close with full
force.
f Take care to ensure that nobody can be injured
when the Panorama roof system is closing.
1. Switch ignition off.
2. Turn knob to position A.
3. Switch ignition on.
4. Hold knob in position A. The closing process
begins after around 5 seconds.
Hold the knob in position until the roller blind
and all roof elements are completely closed.
The process lasts approximately 20 seconds.
Note on operation
If the procedure is interrupted, saving the final
positions must be started from the beginning.
Controls, Safety, Instruments
153

Advertisement

Table of Contents
loading

Table of Contents