Table of Contents
Advertisement
Quick Links
Hands-Free Video Door Phone
Features:
Camera has four LEDs for nighttime
operation
Remotely and securely talk to visitors and
unlock doors, gates, etc. from the monitor
Easily connect additional monitors and an
additional camera*
Simple 2-wire connection
*Additional monitors and camera sold separately.
DP-264-1C7Q
Manual
Built-in microphone
Adjustable color tone, brightness, speaker,
Camera and monitor turn off automatically
Soft-touch button operation
®
Up to
2
Cameras
and ringer volume
when not in use
Up to
3
Monitors
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SECO-LARM SLI ENFORCER DP-264-1C7Q
Summary of Contents for SECO-LARM SLI ENFORCER DP-264-1C7Q
- Page 1 DP-264-1C7Q Hands-Free Video Door Phone Manual Up to Up to Cameras Monitors Features: Camera has four LEDs for nighttime Built-in microphone operation Adjustable color tone, brightness, speaker, Remotely and securely talk to visitors and and ringer volume ...
- Page 2 (2-Wire) - power 1x MOV 1x Wire connector 1x Hex wrench (5-Wire) - camera 1x Diode 1x MOV Also compatible with Also compatible with 1x Hex wrench DP-234Q and DP-222Q DP-234Q and DP-222Q Screen image simulated. Screen image simulated. SECO-LARM U.S.A., Inc.
- Page 3 Chroma / Contrast adjustment Brightness adjustment Camera Unit: Speaker To locking LEDs devices To primary HD CMOS monitor camera Doorbell Interchangeable Camera button message holder speaker "x " volume Microphone (44x11mm) Front View Back View (with sunshield) (without sunshield) SECO-LARM U.S.A., Inc.
- Page 4 6. Connect the AC power adapter’s wires into the "DC" plug on the back of the monitor, making sure to observe polarity. Connection Points Bell Power Monitor mounting bracket Additional Additional Camera Monitor Camera Monitor CN2A CN1A Jumper SECO-LARM U.S.A., Inc.
- Page 5 Adjust the camera’s the camera from sealing properly in the bracket. speaker volume by 11. Secure the camera to the mounting bracket with the turning the potentiometer on the included camera hex screws. back of the unit. SECO-LARM U.S.A., Inc.
- Page 6 To listen in, press the Talk Button to allow 2-way audio communication. When finished, simply press the Monitor Button again and the camera will switch off. If the Talk Button is not pressed again, the monitor and camera will switch off after 30s. SECO-LARM U.S.A., Inc.
- Page 7 Additional Additional Additional Additional Camera Monitor Camera Monitor Camera Monitor Camera Monitor Camera Monitor Camera Monitor CN1A CN2A CN1A CN2A CN2A CN1A Jumper Jumper Jumper resistor E Lock Volume Power E Lock Volume Power Camera Additional Camera SECO-LARM U.S.A., Inc.
- Page 8 (1) year from the date of sale to the original customer. SECO-LARM’s obligation is limited to the repair or replacement of any defective part if the unit is returned, transportation prepaid, to SECO-LARM. This Warranty is void if damage is caused by or attributed to acts of God, physical or electrical misuse or abuse, neglect, repair or alteration, improper or abnormal usage, or faulty installation, or if for any other reason SECO-LARM determines that such equipment is not operating properly as a result of causes other than defects in material and workmanship.
Need help?
Do you have a question about the SLI ENFORCER DP-264-1C7Q and is the answer not in the manual?
Questions and answers