Advertisement
READ ALL INSTRUCTIONS BEFORE OPERATING
1.Prior to plugging the unit into the power source,
inspect completely for any shipping damage.
2.Plug the electrical cord into the power outlet.
3.Carefully place the unit on a stable, flat, dry surface.
4.Position unit to desired angle to direct air flow.
5.Turn switch to desired speed and make sure unit
operates normally
6.Unit's on board power outlet can be daisy chained
to additional units.
7.To reduce the risk of injury, close supervision is necessary
when an appliance is used near children. Do not allow
children to play with or around an Air Mover at any time.
FILLING SCENTED CARTRIDGE
1.Remove scent cartridge from the air mover by turning counter-clockwise
while unit is positioned facing you
2.Flip hinged top open
3.Open scented bead packet sample that is included with your purchase
4.Fill cartridge according to the scent intensity desired
5.Reassemble by screwing cartridge back into the unit clock-wise
OPERATION
A
SETTING
OPTIONAL TIMER
Turn dia
al to select
desired
time
(1-180 m
minutes)
"ON" po
osition sets
unit for
continuous use
SPEEDS
WARNING: KEEP OUT OF REACH OF CHILDREN
- 3 -
Advertisement
