CAME MR8700 Manual
  1. Manuals
  2. Brands
  3. CAME Manuals
  4. Accessories
  5. MR8700
  6. Manual
CAME MR8700 Manual

CAME MR8700 Manual

Opening & safety sensor for automatic sliding doors
Hide thumbs Also See for MR8700:
Table of Contents

Advertisement

Quick Links

Download this manual
MR8700
Opening & safety sensor
for automatic sliding doors
(according to EN 16005 and DIN 18650,
including emergency exits)
DESCRIPTION
1
2
3
4
5
1.
LCD
2.
radar antenna (narrow field)
3.
radar antenna (wide field)
4.
IR-curtain width adjustment
5.
IR-lenses
Specifications are subject to changes without prior notice. All values measured in specific conditions.
6.
cover
7.
main connector
8.
main adjustment knob
9.
IR-curtain angle adjustment knob
6
7
8
9

Advertisement

Table of Contents
loading

Related Manuals for CAME MR8700

Summary of Contents for CAME MR8700

  • Page 1 MR8700 Opening & safety sensor for automatic sliding doors (according to EN 16005 and DIN 18650, including emergency exits) DESCRIPTION cover radar antenna (narrow field) main connector radar antenna (wide field) main adjustment knob IR-curtain width adjustment IR-curtain angle adjustment knob IR-lenses Specifications are subject to changes without prior notice.

  • Page 2: Navigating In Menus

    HOW TO USE THE LCD? DISPLAY DURING NORMAL FUNCTIONING To adjust contrast, push and turn Negative display = active output Opening Safety the grey button simultaneously. impulse During normal function only. FACTORY VALUE VS. SAVED VALUE displayed value = saved value displayed value = factory value NAVIGATING IN MENUS Enter password if...

  • Page 3: Mounting And Wiring

    MOUNTING & WIRING GREEN 12-24 V POWER SUPPLY BROWN AC-DC YELLOW OPENING INPUT WHITE PINK SAFETY INPUT GREY TEST OUTPUT BLUE YE/BK + OPENING INPUT FOR CURRENT WH/BK - SOURCE * Output status when sensor is operational ** For compliance with EN 16005 and DIN 18650, connection to door controller test output is required.
  • Page 4 INFRARED SAFETY FIELD DOOR CLOSER max. 9 cm** AWAY Activate the visible* spots to verify If necessary, adjust the IR-curtain the position of the IR-curtain. angle (from -7° to 4°, default 0°). * Visibility depends on external conditions. When spots are not visible, use MRSP to locate the curtains. ** The distance between the inner curtain of the inside door sensor and the inner curtain of the outside door sensor should always be smaller than 20 cm.

  • Page 5: Overview Of Settings

    OVERVIEW OF SETTINGS Back More factory values for radar immunity, IR immunity, IR number and redirection shopping standard critical increased immunities, 1 curtain PRESETTINGS street env. increased immunities, redirection = motion and presence RAD: FIELDSIZE small > > > > >...

  • Page 6: Troubleshooting

    TROUBLESHOOTING ORANGE LED flashes The sensor signals Replace sensor. 1 x. an internal fault. ORANGE LED flashes The power supply is too Check power supply (in the diagnostics menu of the LCD). 2 x. low or too high. Check wiring. ORANGE LED flashes The sensor receives Decrease the angle of the IR-curtains.

  • Page 7: Installation

    LED-SIGNAL Motion Presence detection detection LED flashes LED flashes LED flashes LED flashes LED is off quickly x times red-green INSTALLATION The sensor should be Do not cover the sensor. Avoid highly Avoid moving objects fixed firmly to avoid reflective objects in and light sources in extreme vibrations.

  • Page 8: Technical Specifications

    Came S.p.A.- Via Martiri Della Liberta 15 - IT-31030 DOSSON DI CASIER (TV) TEL (+39) 0422 4940 - FAX (+39) 0422 4941 - info@came.com - www.came.com Came S.p.A. hereby declares that MR8700 is in conformity with the basic requirements and the other relevant provisions of the directives 1999/5/EC, 2006/95/EC and 2006/42/CE.

Table of Contents