Table of Contents
Advertisement
Available languages
Available languages
OPERATION
Check whether the mains voltage given on the
rating plate (on the underside of the appliance)
matches the local mains voltage.
Preparation
Your appliance is supplied with a dust bag
already fitted. Once you have assembled the
individual parts the appliance is ready to use.
1
P ush the plug-in contact of the elastic hose
the contact
provided on the dust container
H
until it latches into place.
Note
To remove the elastic hose
■
release buttons on the plug-in contact and then
pull out the hose.
2
I nsert the other end of the flexible hose into
metal telescopic tube
3
I nsert the required brush or accessories into the
lower end of the metal telescopic tube
Note
Fit together all the plug-in connections with a
■
push and turn movement and undo them with a
pull and turn movement.
________________________________________
G
, press the side
G
.
C
.
C
Switchingonandoff
1
P ull out the required length of power cord.
in
Caution
The maximum cable length is indicated by a
■
red mark. Never try to pull out the power cord
beyond the red mark.
2
P lug the power cord plug into the wall socket.
3
S witch on the appliance by pressing button
4
S et the required suction power with controller
.
P
5
A fter use, press button
appliance and remove the power cord plug
from the wall socket.
Caution
If the appliance is not being used, always
■
disconnect the mains plug at the wall socket.
Suctioncontrol
.
O
to switch off the
O
ENGLISH
19
Advertisement
Table of Contents
