Product Description - Waldbeck 10031571 Manual

1 Upper housing
2 Switch
3 Lower housing
4 Output tie-in
5 Base
Remark: The image shown here is indi-
cative only. If there is inconsistency bet-
ween the image and the actual product,
the actual product shall govern.
Installation and Mains Supply
1. Consistency
• Your submersible pump is designated for the circulation of water with maximum tempe-
rature of 35 °C.
• This pump may not be used for other fluids, especially motor fuels, cleaning fluids, and
other chemical products!
2. Installation
The submersible motor pump is installed as follows:
• In a stationary position with fixed pipeline or.
• In a stationary position with a flexible Hose pipe.

Product Description

9