Adjusting Trimmer Head Angle - Ryobi RLT-710 Owner's Operating Manual

AdJUstinG triMMer HeAd AnGLe

Adjust the angle of the trimmer head (11) according to the intended operation.
1. Press the unlock button for trimmer head angle adjustment (7) and hold it in position.
2. Adjust to desired position: Adjust to 0° when trimming grass on the flat ground (Fig. 15).
Adjust to 90° when trimming near edges and walls (Fig. 16).
Fig. 15
7
3. Ensure that the unlock button for trimmer head angle adjustment snaps in place.
WArninG! Always ensure that the locking slider snaps in place! only adjust to indicated angles!
never adjust to any other intermediate position!
AdJUstinG piVot HeAd
Adjust the trimmer head to suitable angle. The joint has 3 snap-in positions between 0° and 90°.
1. Press the unlocking button for pivot head adjustment (8) and hold it in position.
2. Adjust to desired position (Fig. 17, 18).
Fig. 17
0°
prepArAtion
Fig. 16
Fig. 18
8
7
8
90°
9