Table of Contents
Advertisement
1
1
Flag
Small
Turret
Tabs
Drawbridge
Base
Back View
Back View
• Position the drawbridge base on a flat surface so
that the back faces you.
• Position the small turret so that the back faces
you. Insert and snap the small turret tabs into the
drawbridge base slots.
• Position the small turret top so that the decorated
side is upright. Fit and snap the small turret top
slots onto the small turret tabs.
• Insert a screw through the small turret top, small
turret and into the drawbridge. Tighten the screw
with a Phillips screwdriver. Do not over-tighten.
• Insert a flag into the hole in the small turret top.
A
s
s
e
m
A
s
s
e
m
Small
Turret Top
Tabs
3
b
l
y
b
l
y
2
2
Large Turret Top
Large Turret
Tab
Ridge
2nd Floor
Back View
Back View
• Position the 2nd floor so that the decorated side is
upright. Insert the 2nd floor between the ridge
and three tabs on the inside of the large turret.
• Insert three screws through the 2nd floor and into
the large turret. Tighten the screws with a Phillips
screwdriver. Do not over-tighten.
• Position the large turret top so that the decorated
side is upright. Fit and snap the large turret top
slots onto the large turret tabs.
• Insert a flag into the hole in the large turret top.
Flag
Tabs
Advertisement
Table of Contents
