Utilities - QSign QA39 User Manual

4. The display shows Turn Off if scan is disabled. OR the display shows Turn on if scan is enabled.
5. Press [ ] to select.
6. The LED blinks red and the Scan icon is displayed when Scan is enabled. OR the LED turns off
and the Scan icon is not displayed when Scan is disabled.
Responding to a Scan
During scanning, your raddio stops on a channel/group where activity is detected. The radio stays
on that channel for a programmed time period known as "hang time".
Procedure :
1. Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from your mouth. If the Channel Free
indication feature is enabled, the transmitting radio releases the PTT button, you will hear a short
alert tone, indicating the channel is free for you to respond.
2. Press the PTT button during hang time. The LED lights up red.
3. Release PTT button to listen.
4. If you do not respond withinthe hang time, the radio continues scanning other channels/groups.

Utilities

Keypad locked and Keypaad unlocked
You can lock your radio' s keypad to avoid inadvertent key entry.
Procedure :
1. Press [ ] to access the menu.
2. Press [ ] or [
3. Press [ ] or [
4. Press Utilities to Keypad Lock and press [
5. The display shows Keypad Locked and returns to the Home screen.
6. To unlock the keypad, press [
7. The display shows Keypad Unlocked and returns to the Home screen.
Turning Keypad Tones On or Off
You can enable and disable keypad tones if needed.
Procedure :
1. Press [ ] toaccess the menu.
2. Press [ ] or [
3. Press [ ] or [
] to Utilities and press [
] to Radio Settings and press [
] button then press [
] to Utilities and press [
] to Radio Settings and press [
] to select.
] to select.
] to select.
] button.
] to select.
] to select.
PAGE 23