Emergency Operation - QSign QA39 User Manual

Making an All Call
This feature allows you to transmit to all users on the channel. Your radio must be programmed
to allow you to use this feature.
Procedure :
1. Turn the Channel Selector Knob to select the channel with the active All Call group alias or ID.
2. Press the PTT button to make the call, the display shows the All Call group alias or ID, and the
All Call icon. User on the channel cannot respond to an All Call.
Making a Group, Private Call with the One Touch Access Button
The One Touch Access feature allows you to make a Group or Private Call to a predefined alias or
ID easily. This feature can be assigned to a short or long programmable button press. You can only
have one alias or ID assigned to a One Touch Access button. Your radio can have multiple One Touch
Access buttons programmed.
Procedure :
1. Press the programmed One Touch Access button to make a Group or Private Call to the
predefined alias or ID.
2. Press the PTT button to make the call. Thedisplay shows the group/subscriber a;ias or ID,
and the Group/Private CAll icon.
3. Release the PTT button to listen. When the target radio responds, the LED blinks green.
4. If there is no voice activity for a predetermined period of time, the calls ends. Radio returns
to the screen you were on prior to initiating the call.

2. Emergency Operation

An Emergency Alarm is used is used to indicate a critical situation. You are able to initiate an
Emergency at any time on any screen display even when there is activity on the current channel.
Each alarm has the following types :
Disabled : Radio cannot transmit alarm signal, but can receive alarm from other radios.
Regular : Radio transmits an alarm signal and shows audio and/or visual indicators.
Silent : Radio transmits an alarm signal without any audio or visual indicators.
Silent with Voice : In alarm status initiate an alarm, press [PTT] button to call and emit sound.
Exiting Emergency Mode
Your radio exits Emergency mode when one of the following occurs :
• Emergency Alarm acknowledgement is received (for Emergency Alarm only),OR
• All retries to send the alarm have been exhausted, OR
• TheEmergency Off button is pressed.
• Press [PTT] button
NOTE : If your radio is powered off, it exits the Emergency mode. The radio will not reinitiate the
Emergency mode automatically when it is turned on again.
PAGE 10