Text Message Features - QSign QA39 User Manual

Making a Call Alert from the Contact List
Procedure :
1. Press [ ] to access the menu.
2. Press [ ] or [
3. Press [ ] or [
to Manual Dial and press [
the subscriber ID you wanr to page and press [
4. Press [ ] or [
< Subscriber Alias or ID>, indicating that the Call Alert has been sent.
5. The LED light up red when your radio is sending the Call Alert.
6. If the Call Alert acknowledgement is received, a tone sounds and the display shows Call Alert
Successful. OR if the Call Alert acknowledgement is not received, a tone sounds and the display
show Call Alert Failed.

Text Message Features

Your radio is able to receive data, for example a text message from another radio. The maximum
length of characters for a text message is 164.
NOTE : Press [
Writing and Sending Text Message
Procedure :
1. Press [ ] to access the menu.
2. Press [ ] or [
3. Press [ ] or [
4. A blinking cursor appears, use the keypad to type your message. Press [
space to the left. Press [
key to delete any unwanted characters.
5. Press [ ] button to send or store once message is completed.
6. Select Send and press [
message, or press [
press [ ] button.
7. The display shows Text Message :< Subscriber/Group Alias or ID>, confirming your message is
being sent.
8. If the message is sent, a tone sounds and the display shows Message Sent. OR if the message
is not sent,
] to Contacts and press [
] to the required subscriber alias or ID and press [
] button twice to select, the display shows a blinking cursor, input
] button to Call Alert and press [
] at any time to return to previous screen.
] to Messages and press [
] to Write and press [
] or the [
] or [
] or [ ] to Manual Dial, press [
] toselect.
] button.
] to select.
] to select.
] key to move one space to the right. Press [
] to the required alias or ID and press [
] to select. OR press
] button. The display shows Call Alert :
] button, input subscriber ID and
] to move one
]
] to sent the
PAGE 15