Panoptigon Panochord Owner's Manual page 9

Operation
Panoptigon Disc Player
• Put a disc in the Panoptigon (refer to the Panoptigon's Owner's
Manual). Select the proper mapping on the Panoptigon Disc Player
for the disc you are using (Optigan, Orchestron, or Panoptigon).
• Select the mode on the Chord Controller that matches the disc
type (Optigan, Orchestron, or Panoptigon), and select one of the
Operation types (normal or radio).
• Select the MIDI output channel on the keyboard and Chord Controller
that matches the receiving MIDI channel on the Panoptigon (or use the
ALL MIDI channel selection on the Panoptigon to confirm operation).
• Set levels and ensure that the disc is spinning.
• Use the white buttons to play chords. For Optigan discs, the rocker-
switches will play the sound effects tracks.
iOptigan App
• You can use the iOptigan app plus a Chord Controller with or without
a keyboard controller.
• Ensure one of the iOptigan modes is selected (either normal or radio).
• Confirm in the app settings that the adapter is recognized and that
the device is set up to receive MIDI.
• Confirm the MIDI OUT channel on the Chord Controller agrees with
the MIDI receive channel in the app.
• If using a keyboard controller, confirm the MIDI channel is properly
set to the same channels as the Chord Controller and app.
Other MIDI players
• You can use the Chord Controller with another MIDI sound module as
long as it can respond to MIDI NOTE ON and NOTE OFF messages
in the range of MIDI note number 38 to 80 (D2 to G#5).
• Use either the Orchestron mode or the Panoptigon mode (an octave
lower than Orchestron mode), and select one of the operations (either
normal or radio).
• Confirm the MIDI OUT channel on the Chord Controller agrees with
the MIDI receive channel in the module.
• If using a keyboard controller with the Chord Controller, the sound
module may support different note ranges and may receive on
multiple MIDI channels. Please check for compatibility in the device's
owner's manual.
9