Mode Select Knob - Panoptigon Panochord Owner's Manual

MIDI Out Channel Knob
This selects the MIDI transmit data channel for the Chord Controller.
The channels available include 1 through 7 and 10. MIDI channel
10 is often used for drums or percussion sound modules, so this
allows for the possibility of using the Chord Controller as a simple
drum module controller.

Mode Select Knob

This knob selects from eight different modes that correspond to four
mappings, and a normal or radio operation for each mapping.
These are explained in detail in the paragraphs on the following
page.
4