Page 1
Canon PFI-101/102/103/105 1. Conduct Part Check : 1.1). Lock for cover x 1 1.2) chip set holder x 1 1.3). chip set sliding plate x 1 1.4). ink refill hole plug x 1 2. After refill ink, insall the plug on the ink refill hole, the the ink will not flow out from the cartridges 3.
Page 2
4. Install the chip set sliding plate, then it will fix the chip set holder as the picture. 5. it is easy to install cartridge into printer. Use the lock for cover in the right place as the picture show as below. Caution:Refill the ink when the ink lower because the ink level detection have been cancel.
Page 3
Please press right button one time. the printer screen will show the information: if supply the ink and occur fault, Canon is not responsible for this. Please press right button one time. the printer screen will show the information: cancel the detection function of remaining ink level.