Klarstein DeLorean User Manual page 36

EN
36
Replacing the activated charcoal filters:
1 Open the comfort panels pulling them downwards.
2 Remove the metal grease filters
3 Remove the saturated activated charcoal filter.
4 Fit the new filters.
5 Replace the metal grease filters.
6 Close the comfort panel.
Fix
Remove
Light Replacement (1.5 W LED light)
• Switch off the extractor hood and isolate the extractor hood by pulling out the mains
plug or switching off the fuse.
• Remove the grease filter.
• Remove the light by levering its fitting from
the hood body (this may require pressure
or force to be applied).
• Disconnect the connector of the light
• Replace the light with a new one of the
same type (1.5 W LED light),making sure
that you connect the light with the light
cable correctly.
• Reinstall the light back to the hood body.
Remove
Fix