Johanson Decibel Clamp wall Assembly Instructions Manual page 7

5
Use the two small wood screws
supplied to secure the sound absor-
ber in place on the bracket.
7
Mount the roof bracket with the
supplied wooden screws.
(Other attachment may be required
for porous material).
6
Slide the adjustable wire locks into
place on the three wires. To release
the wire, simply press the end of
the lock. This makes adjusting the
length of the wire easy.
8
While supporting the sound absor-
ber, hook it in place on the ceiling
fitting, as shown in the photo