Johanson Decibel Clamp wall Assembly Instructions Manual page 6

1
2
4
1
The sound absorber is supplied with
the following components for assebly:
1. Bracket
2. Wire with adjustable cable lock (3 pcs)
3. Ceiling fitting
4. Assembly screws (4 pcs)
3
Slide the sound absorber into place
in the bracket with the reverse side
facing the wires.
3
2
Fit the wires so that the end stops
slot all the way into the counterbore
on the bracket.
4
Adjust the sound absorber, so that it
is centred in the bracket.