Pre-Maintenance Procedures; Lifting The Machine - Toro Groundsmaster 4500-D Operator's Manual

Pre-Maintenance
Procedures

Lifting the Machine

Use the following as points to lift the machine:
Front of the machine—at the frame of the machine,
forward of the wheel-drive motors (Figure 77)
Important:
Do not support the machine at the
wheel-drive motors. Keep the lifting equipment
clear of hydraulic tubing and hoses.
g036671
Figure 78
g036670
Figure 77
Rear of the machine—at the center of the axle
(Figure 78)
Locate the jackstands of the specified capacity at both
sides of the gear case and under the axle.
Important:
Do not support the machine at the tie
rod.
61