Marantz NR1609 Owner's Manual page 16

Contents Connections
q w e r t y
o
A Power operation button (X)
Used to turn the power of the MAIN ZONE (room where this unit is
located) on/off (standby). (v p. 68)
B Power indicator
This is lit as follows according to the power status:
Off: Power on
0
Red: Normal standby
0
Orange:
0
When "HDMI Pass Through" is set to "On" (v p. 160)
0
When "HDMI Control" is set to "On" (v p. 162)
0
When "Network Control" is set to "Always On" (v p. 201)
0
Front panel Display
Playback
u i
C INPUT SELECTOR knob
D M-DAX indicator
E Remote control sensor
F Display
G PURE DIRECT indicator
H VOLUME knob
I Headphones jack (PHONES)
16
Rear panel
Settings Tips
This selects the input source. (v p. 68)
This lights when the M-DAX mode is selected. (v p. 151)
This receives signals from the remote control unit. (v p. 9)
This displays various pieces of information. (v p. 18)
This lights when the "Pure Direct" mode is selected as the sound mode.
(v p. 115)
This adjusts the volume level. (v p. 69)
This is used to connect headphones.
When the headphones are plugged into this jack, audio will no longer
be output from the connected speakers or from the PRE OUT
connectors.
NOTE
0 To prevent hearing loss, do not raise the volume level excessively when using
headphones.
Remote
Appendix
Index