Cleaning And Care; Cleaning; Care And Storage - Cognisys Scout Owner's Manual

2.6 Cleaning and Care

We want your Scout equipment to last – so here are some brief steps to keep it happy!

2.6.1 Cleaning

For cleaning we recommend a slightly dampened (not wet) micro-fiber cloth. Do not spray
water directly into the inside of the equipment. Any liquid that goes into the controller may
cause an electrical failure of the device. Do not use a flammable liquid/solvents or cleaning
agents on the controller – just a micro-fiber cloth (dampened if needed).

2.6.2 Care and storage

Scout equipment is designed to handle normal wear and tear but there are some things to
avoid:
Do not get the unit wet internally.

If not using the external connectors be sure to attach the protective cover or

water may leak into the controller causing damage.
Do not drop the unit (the display, much like a cell-phone, is made of glass)

Protect the unit's display and membrane when packing up your gear. If a tripod

fights the display or membrane on the controller – the controller will lose.
Do not allow dirt to get into the weatherproof seal. This could cause seal failure

and damage to the Receiver.
Remove all batteries prior to long term storage.

Failure to properly care for the Scout Receiver could result in a leak that may damage the
Receiver. The product warranty does not cover water damage resulting from user error.
10