1. Manuals
  2. Brands
  3. AVteq Manuals
  4. Racks & Stands
  5. ELT 2100
  6. Easy setup manual

AVteq ELT 2100 Easy Setup Manual

Hide thumbs
1
2
3
4
5
6

Advertisement

Table of Contents

Easy Setup Guide
ELT 2100

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ELT 2100 and is the answer not in the manual?

Questions and answers

Related Manuals for AVteq ELT 2100

Summary of Contents for AVteq ELT 2100

  • Page 1 Easy Setup Guide ELT 2100...
  • Page 2 Fixed base Base (Not included) Central Camera Philips flat head 5/16 '' flange nut support 1/4"x3/4'' Allen wrench 4mm Allen wrench 3mm Multi wrench Body 2 with break 2 without break Mount kit 5/16" x 11/4" screw WHEELED BASE 1" Washer INSTALLATION 3/4"...
  • Page 3 FIXED BASE INSTALLATION Attach the base (C) to the body (A) with the 5/16'' flange nut (E) and secure the rack with the Phillips flat head 1/4''x3/4'' (F) turn the blind nuts of the base until the pedestal is steady Note: Fixed base not included Place screen at...
  • Page 4 Secure with the Knob Adjust camera support back and forth to the desired position Attention: Follow this step in case to use Central camera support Attach support (M) with 1/4''x 1/2 '' screws (F) to mount and secure with 1/4 '' nut (L) Secure the camera support with kit (O)
  • Page 5 Lock installation Place the lock Install M5X15 screw on the Lock Secure with a Lock screw...
  • Page 6 Lock Assembly Pull Cilinder Slide Pull over Cylinder. The Flange must be as shown in the diagram Slide Cylinder through hole in glass as shown in diagram Twist Nut onto Cylinder as shown in diagram. Ensure that it’s placed in the correct posi- tion as shown in diagram.

Table of Contents