Maintenance; Recommended Maintenance Schedule(S); Maintenance Safety - Toro Super Recycler 21383 Operator's Manual

Table of Contents

Advertisement

Maintenance

Recommended Maintenance Schedule(s)

Maintenance Service
Interval
After the first 5 hours
Before each use or daily
Every 25 hours
Yearly
Yearly or before storage

Maintenance Safety

Disconnect the spark-plug wire from the spark plug
before performing any maintenance procedure.
Wear gloves and eye protection when servicing
the machine.
The blade is sharp; contacting the blade can result
in serious personal injury. Wear gloves when
servicing the blade. Do not repair or alter the
blade(s).
Never tamper with safety devices. Check their
proper operation regularly.
Tipping the machine may cause the fuel to leak.
Fuel is flammable and explosive, and can cause
personal injury. Run the engine dry or remove the
fuel with a hand pump; never siphon the fuel.
To ensure optimum performance of the machine,
use only genuine Toro replacement parts and
accessories. Replacement parts and accessories
made by other manufacturers could be dangerous,
and such use could void the product warranty.
Maintenance Procedure
• Change the engine oil.
• Check the engine-oil level and add oil as needed.
• Ensure that the engine shuts off within 3 seconds after releasing the blade-control
bar.
• Check the blade-brake-clutch operation.
• Clean grass clippings and dirt from under the machine.
• Lubricate the rear wheel gears.
• Clean the blade-brake-clutch shield.
• Service the air filter.
• Change the engine oil.
• Replace the blade or have it sharpened (more frequently if the edge dulls quickly).
• Clean the engine by removing dirt and debris from its top and sides; clean it more
frequently in dusty operating conditions.
• Empty the fuel tank before repairs as directed and before yearly storage.
24

Advertisement

Table of Contents
loading

Table of Contents