Checking The Engine-Oil Level; Adjusting The Handle Height; Adjusting The Cutting Height - Toro Super Recycler 21383 Operator's Manual

Checking the Engine-Oil Level

Service Interval: Before each use or daily
Important:
If the oil level in the crankcase is too low or too high and you run the engine, you may
damage the engine.

Adjusting the Handle Height

You may raise or lower the handle to a position comfortable for you.
Rotate the handle lock, move the handle to 1 of 3 positions, and lock the handle into position

Adjusting the Cutting Height

CAUTION
If the engine has been running, the muffler will be hot and can severely burn you.
Keep away from the hot muffler.
Adjust the cutting height as desired. Set all wheels to the same cutting height
Figure 12
Figure 13
11
(Figure
(Figure 14).
g235721
13).
g238410