Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for P.Audio XT Series
Summary of Contents for P.Audio XT Series
- Page 1 XT S ERIES ANUAL UDIO...
- Page 2 READ ALL OF THE INSTRUCTIONS INCLUDED IN THIS MANUAL The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operation and maintenance instructions. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-insulated “dangerous voltage”...
-
Page 3: Table Of Contents
The XT Series of products is designed for both installation and portable, truly professional sound reinforcement systems. The XT series of mid-hi cabinets are all passive, whilst the subwoofers are available in both active and passive versions. This manual will concentrate on the active versions of the subwoofers. -
Page 4: Specifications
2. SPECIFICATIONS Model XT-8 XT-10 XT-12 XT-15 XT-15P SUB XT-15A SUB XT-18P SUB XT-18A SUB Type Passive 2-Way Passive 2-Way Passive 2-Way Passive 2-Way Passive Active Passive Active Subwoofer Subwoofer Subwoofer Subwoofer Woofer Size 8" 10" 12" 15" 15" 15" 18"... - Page 5 Power LED; Clip LED; Clip LED; Signal LED Signal LED * NOTE: Max Acoustic Output is based on smoothed system response, not peak driver response. P.Audio is continually looking to improve products, so specifications are subject to change without notice.
-
Page 6: Setup And Use Of The Xt Products
3.1. AC MAINS CONNECTION NOTE: The powered models in the XT series use an automatic switching power supply. ONLY the 3 pin mains power lead supplied with the unit may be used. DO NOT SUBSTITUTE AC MAINS POWER CONNECTION LEADS. -
Page 7: Audio Connections
(see section REMOTE SOFTWARE). The preset EQ may be adjusted to match one of the cabinets in the XT series (presets 1-4), the 3LINE-C enclosure (Preset 5), user presets adjusted with the remote control software (presets 6,7) or pink noise (preset 8). The pink noise preset is useful as a locator... -
Page 8: Remote Software - Xt Series
ERIES The remote control software enables the user to adjust EQ, delay, polarity, noise gates and other aspects of the XT series enclosures performance. Once the unit is connected to the computer, any changes made on the computer will become active, but will NOT be saved onto the amplifier, until the preset is stored onto the XT series amplifier. -
Page 9: Controlling The Xt Series Speakers
4.4. CONTROLLING THE XT SERIES SPEAKERS Once the software is up and running, all connected speakers will be seen in the ID list to the left hand side of the screen. All parameters available to the user will be available by double clicking the device required to monitor, and the parameters screen will be displayed. -
Page 10: Protection
DLF – DLF is a set of filters tuned specifically to make recorded music sound more dynamic at low levels. In the ‘music’ presets on the amplifier, this option is turned on. High Pass Filter – All of the cabinets already have a high pass filter programmed in, but an extra high pass filter is provided to the user for crossover, or extra subsonic filtering. -
Page 11: Application And Trouble Shooting Tips
5. APPLICATION AND TROUBLE SHOOTING TIPS The XT Series makes up components of a high-quality professional sound reinforcement system designed for use in both indoor, and dry outdoor applications. Some basic precautions will insure long-term reliability. EQUALIZATION AND GAIN The XT-15A SUB and 18A SUB have all the required equalization and gain functions included in the digital signal processing circuits. -
Page 12: Product Service
NOT BE SET DOWN ON THE COMPONENT SIDE OR DAMAGE WILL OCCUR! NOTE: The powered models in the XT series feature an internal fuse to protect the power amplifier. THE INTERNAL FUSE IS NOT USER REPLACABLE. UNDER NO CIRCUMSTANCES SHOULD THE AMPLIFIER PANEL BE REMOVED FROM THE CABINET.
Need help?
Do you have a question about the XT Series and is the answer not in the manual?
Questions and answers