Subscribe to Our Youtube Channel
Related Manuals for RC4 Wireless LumenDimPix
Summary of Contents for RC4 Wireless LumenDimPix
- Page 1 Wireless Dimming | Wireless DMX | Wireless Motion Since 1991 W i r e l e s s LumenDimPix Wireless Pixel Driver Quick Start Guide Rev. 1.0...
- Page 2 Negative (ground) power to pixels For pixel loads drawing more than 6A, pixel power should connect DIRECTLY to the power supply or battery, NOT through the LumenDimPix. A common ground (-) is always required between the LumenDimPix and the pixels.
-
Page 3: Registering Your Product
• A DMX lighting console. based) applications of pixel tape, pixel panels, festoon strings, and other pixel products. The small size and light weight of the LumenDimPix make it perfect for costumes and small props, even hats and wigs. • A LumenRadio CRMX-compatible wireless transmitter like the RC4 LumenDimIO or the LumenRadio TX1. -
Page 4: Performing A Factory Reset
One set of mating connectors is included with the LumenDimPix. Additional connectors can be purchased from RC4 Wireless. * performing a factory reset is easy: Connecting wires is easy: Power on the device. -
Page 5: Link Button
When the RF Connect LED is off, the LumenDimPix is ready to be linked to your transmitter. PUSH NOTE: Link status is not affected by performing a Factory Reset (see page 7). - Page 6 Keyframe simple but powerful means of creating and controlling up to 1000 pixels. RC4 The LumenDimPix and CPP driver replicates the keyframe down the entire length CPP vastly reduces the number of channels needed, while supporting a level of of connected pixels, up to 500 for each of two pixel driver ports. A variety of designer creativity not possible with other channel-saving techniques.
- Page 7 DMX channel levels to assign values to level for the pixel type being used. If the level of any subsequent parameter LumenDimPix parameters. Channel levels are captured and saved with the channel is at zero, the previous setting for that parameter is retained. This press of a single button for each driver port using the SetA and SetB buttons.
- Page 8 Text and live DMX channel data must be streaming. Select the color-order of the pixel product being used, and the LumenDimPix will re-order the control channels for red/green/blue control from your console: The first channel in the DMX universe that is at a non-zero level will be assigned (red/green/blue, default) as the DMX Start Channel.
- Page 9 Set Group Size in Pixels Set Pattern Replication Method Title Title This parameter is configured to support 12 different methods of extending the Keyframe pattern over the length of all pixels controlled by a CPP driver. The first 4 methods are currently assigned. The remaining 8 methods are not The second channel after the DMX Start Channel sets the Group Length in Text Text...
- Page 10 RC4 Custom Pixel Profile parameters. Watch for firmware update announcements.) * MY9231 control requires a very small clock adaptor module between the LumenDimPix and the first pixel, available from RC4 Wireless.
- Page 11 North Carolina, USA, Local +44 (0)20 3289 8765 London, UK 1-866-237-6641 Toll Free Fax, North America Email: support@theatrewireless.com Website: www.rc4wireless.com Knowledge Base: http://rc4.info We’re here to help you at any time. James David Smith President and Chief Product Designer RC4 Wireless...
Need help?
Do you have a question about the LumenDimPix and is the answer not in the manual?
Questions and answers