Speed Dialing Code Charts - Verizon 5ESS User Manual

DMS 10 Intercom Code Chart
Name
48 48
Code Telephone Number
#2
#3
#4
#5
#6
#7

Speed Dialing Code Charts

The following charts are provided for you to list your Speed Dialing codes. The
length of your individual Speed Dialing list is determined by your switch type.
Your switch type can be found on the front cover of this guide. Be sure to use
the Speed Dialing list that corresponds to your switch type. The instructions for
setting up a list and making calls using Speed Dialing can be found below and
also on page 30 of this guide.
To establish or change your Speed Dialing list:
Lift the receiver and listen for dial tone.
Press and listen for dial tone.
7 4
*
Press .(GTD-5 only, skip this step in all other switches).
# 1
Press the Speed Dialing 1-digit code number to be programmed
(see pages 50-51).
Dial the telephone number to be assigned to the code.
Listen for confirmation tone.
Hang up.
Repeat steps for each Speed Dialing code number to be programmed.
To make a call using Speed Dialing:
Lift the receiver and listen for dial tone.
Press .(all switches) and then dial the Speed Dialing code number
# 1
(see pages 50-51).
You will hear the called number ringing.
Wait for party to answer.
49 49