Table of Contents
Advertisement
2. INSTALLING PC5750
2.1 Precautions
1) Do not insert the PC5750 before installing the software in laptop
computer. When you complete the software installation, the system
will prompt you to insert the PC5750 into the Type II PC card slot.
2) Once the card has been inserted into the laptop, do not remove it from
your laptop without first completing the unplugging/ejection process.
2.2 Recommended System Requirements
To successfully install and use the PC5750 card in your laptop, the following system
specifications are required.
Item
Operating system
Card slots
Processor
Disk drive
Memory
Disk space
Dial-up networking
* PC5750 is not designed for hand-held or Pocket PC. Voice service is not also
supported.
2.3 Installing Software
2.3.1 Installation
If you install VZAccess Manager, it will install USB Driver for PC5750.
•
You can just follow the instruction from VZAccess Manager installation.
PC5750 User's Manual
Required Specification
Windows ® XP / Windows ® 2000 / Mac OSX 10.3.9.
Type II PC Card slot (CardBus)
Pentium 150MHz or faster
DUN bound to TCP/IP
CD-ROM
32 MB
14MB
4
Advertisement
Table of Contents
