Display Panel Function; Calorie Counter Mode; Timer Mode; Distance Mode - Bestway 58517 Owner's Manual

Suitable for in-ground pools or above ground metal frame pools (Pool size: length≥4.57 m(15'), width≥2.44 m(8'), depth≥1 m(39.5"))
Suggested water temperature range: 15-35°C
Speed range (Approximate):
INTENSITY LEVEL 1
m/s 0.65 0.74
yd/s 0.71 0.81
Frequency band: 433.92 MHz
Maximum radio-frequency power: 8 dBm
No. Item
1 P04752
2 P04753
P04754(EU)/
P04875(GB)/
3
P04874(CH)
4 P04755
P04756
5
P04757
6

Display Panel Function:

A Digital display window
Display current mode parameters
B

Calorie counter mode

1. Press this button in free running mode, the digital screen
displays the calorie interface
2. Press and hold this button in any state to enter the
calorie consumption mode setting interface, and the
calorie consumption mode button indicator will flash.
Press the "+/-" button to set the parameter increase or
decrease (range 10-1000 cal). After the setting is
completed, press the
operation.
C

Timer mode

1. Press this button in free running mode, the digital screen
displays the time interface
2. Press and hold this button in any state to enter the
timing mode setting interface, and the timing mode
button indicator will flash. Press the "+/-" button to set
the parameter increase or decrease (range 5-90 minutes). After the setting is completed, press the
operation.
D

Distance mode

1. Press this button in free running mode, the digital screen displays the distance interface
2. Press and hold this button in any state to enter the distance mode setting interface, and the m/yd indicator will flash. Press the
"+/-" button to set the parameter increase or decrease (range 10-5000 m/10-5500 yards). After the setting is completed, press
the start button to start the operation. (Pressing this button without holding it down will switch between m/yd units)
E Stop button
1. In all cases except the standby state, press the stop button to clear the current data and the machine will enter the standby state.
2. When the fault code is reported, press this button to cancel the fault and the machine enters the standby state.
F Speed and parameters adjustment buttons
During operation, you can accelerate or decelerate by pressing the "+/-" key; in the mode setting, you can set the parameter to
increase or decrease by pressing the "+/-" key.
G Start/pause button
1. Press this button in the standby mode to enter the free mode, and press this button to pause during operation. The machine will
stop automatically after a maximum of 90 minutes of operation.
2. After the calorie consumption, timing or distance mode setting is completed, press this button to start running. Press this button to
pause during operation.
H LED light switch button
Press to turn on/off the LED light
I Distance unit indicator
m/yd indicator
2 3 4 5 6
0.83 0.92 1.01 1.10
0.91 1.01 1.10 1.20
Description
Remote control
Swim fitness system
Transformer
Mounting bracket
Screws
Set screw
start button to start the
1
7 8
1.19 1.30
1.30 1.42
QTY
2
1
1
1
1
2
1
A B C
3
J I H G
D E F
start button to start the
EN
6
5
4
3