1.3. Design
Depth lock lever
Milling
head
cover
Milling
head
Screws locking the bevel angle
Guide set
1.4. Equipment included
The BM-21S is supplied in a metal box with complete standard equipment. The included
equipment consists of:
Copying, using, or distributing without permission of PROMOTECH is prohibited.
Depth knob
Bevel angle scale
Fig. 2. View of the machine and the control panel
Bevelling machine
Cutting insert
Metal box
8 mm hex wrench
6 mm hex wrench
4 mm hex wrench
12 mm flat wrench
T15P torx screwdriver
Oil for stainless steel
Grease for screws
Operator's Manual
This document is protected by copyrights.
Bevel width scale
1 unit
10 units
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
1 unit
5
BM-21S
Power switch
START
STOP
Operating
mode
lamp
Overload lamp