Charging The Battery - Lenoxx BT9378 Manual

• Do not expose the unit to water.
• Do not place the unit on an amplifier or receiver.
• Do not open the cabinet as this might result in damage to the circuits or an electric shock. If a
foreign object gets into the unit, contact your dealer or service company.
Cleaning:
• Unplug the unit from the power outlet before cleaning.
• Do not clean the unit with chemical solvents as this may damage the finish. Use a clean, dry cloth.
• Do not submerge the unit or power adaptor in water.

CHARGING THE BATTERY

To charge the battery:
Connect the power adaptor to the speakers DC in socket.
If the speaker is turned off, it will charge but no indication will be shown on the screen.
If the speaker is turned on, the battery icon on the display screen will be illuminated and show that it
is charging.
When the battery has completed charging, it will be 'steady' on the display screen. The battery icon
will show 3 bars when it has completed charging.
When the charge lead is removed from the charging socket on the speaker, the speaker will operate
off battery power.
As the battery power decreases, the battery icon will show 2 bars and then 1 bar.
When the battery is flat, the battery icon will show 3 bars and will flash on the display screen.
When the battery is very flat, there may be distortion on the sound being played back or the sound
will drop in and out. Not all of the buttons/controls/functions on the speaker will be functional. If
this occurs, please connected the speaker to the power adaptor to charge it.
The battery will take 2 hours to fully charge.
Playback time on the battery is for 2.5 – 3 hours at 50% volume.
If the speaker sound is louder, the battery time is decreased.
ACCESSORIES:
Power adaptor x 1
3.5mm AUX in lead
Remote control
UHF wireless microphone