Accessories; Getting Started - Venturer PLV16198 Instruction Manual

19” digital lcd tv
Hide thumbs Also See for PLV16198:
Table of Contents

Advertisement

Please check and identify the supplied accessories.
Remote Control ......................................................................................................................... x 1
"AAA" Batteries (for remote control) ........................................................................................ x 2
Screws (for base stand) .......................................................................................................... x 4
USING THE REMOTE CONTROL
• Point the remote control at the remote sensor located on the unit.
• When there is a strong ambient light source, the performance of the infrared remote sensor may be
degraded, causing unreliable operation.
• The recommended effective distance for remote operation is about 16 feet (5 meters).
TO INSTALL BATTERIES
1. Open the battery door.
BATTERY REPLACEMENT
When the batteries become weak, the operating distance of the remote control is greatly reduced and
you will need to replace the batteries.
CAUTION:
Danger of explosion if battery is incorrectly replaced.
NOTES:
• If the remote control is not going to be used for a long time, remove the batteries to avoid damage
caused by battery leakage corrosion.
• Do not mix old and new batteries. Do not mix ALKALINE, standard (CARBON-ZINC) or rechargeable
(NICKEL-CADMIUM) batteries.
• Always remove batteries as soon as they become weak.
• Weak batteries can leak and severely damage the remote control.
WARNING : Do not dispose of batteries in a fire. Batteries may explode or leak.
Many universal remote controls have a "learning" feature. We recommend you use this feature to
program the remote control.
For any questions or problems related to programming a universal remote control, you must contact the
customer service department of the universal remote control manufacturer for assistance, or refer to
the instructions included with the universal remote control. We cannot offer assistance in programming
universal remote controls.
PLV16198S2_01-11.pmd

ACCESSORIES

GETTING STARTED

2. Insert 2 "AAA" batteries.
E - 5
5
+
_
_
+
9/7/2007, 12:30 PM

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents