Advertisement
Table of Contents
- 1 Required Parts
- 2 Step 1: Locate All the Parts Needed for Assembly.
- 3 Step 2: Adjust the Corner Leg and Side Legs.
- 4 Step 3: Install Tinnerman Clips.
- 5 Step 4: Attach the Modesty Panel.
- 6 Step 5: Attach the Leg Sets and Modesty Panel.
- 7 Step 6: Tighten Screws and Flip the Desk.
- Download this manual
Advertisement
Table of Contents
Related Manuals for SMITH SYSTEM Corner Acrobat Desk 26492
Summary of Contents for SMITH SYSTEM Corner Acrobat Desk 26492
- Page 1 www.smithsystem.com Form #179855 04/2014...
- Page 2 Assembly Instructions Required Parts #10 Wood Screw (22)* 10-32X1/2” Machine Screw (8) 1/4-20X1/2” Machine Screw (26) P/N 70054 P/N-70226 P/N-77471 Tinnerman Clips (4) P/N-77482 Table Top (1) Leg Set (1) (2 Legs per Set) Corner Leg (1) Modesty Panels (2) *Our Acrobat Workstations come in different lengths and shapes, so hardware and screw hole placement will vary.
- Page 3 Assembly Instructions Assembly Instructions Step 1: Locate all the parts needed for assembly. Place the table top face down on a clean, dry surface. Align the leg sets and the corner leg with the predrilled holes in the top. Step 2: Now adjust the corner leg to the desired height using (4) ¼-20X1/2” Machine Screws. Next adjust the side legs using (8) ¼-20X1/2”...
- Page 4 Assembly Instructions Step 3: Now Install (1) Tinnerman Clip per leg, in the square hole located inside of the leg. Next Install (4) Tinnerman Clips at the top and the bottom of the corner leg. NOTE: Tinnerman Clips are only used if the desk is raised to a high range, when set to a low range the threaded hole for the lower leg will be used instead of the Tinnerman Clips.
- Page 5 Assembly Instructions Step 5: Attach the leg sets, the corner leg, and the Modesty panel to the top using the wood screws provided. Step 6: Go back and tighten all of the screws referenced in step 4. With help, flip the desk into the upright position.
Need help?
Do you have a question about the Corner Acrobat Desk 26492 and is the answer not in the manual?
Questions and answers