Furniture of America CM-AC293 Assembly Instructions

Table of Contents

Download this manual

Assembly Instructions

CM-AC293

ASSEMBLY RATING

The Assembly Rating is a 5-point system that

shows the degree of effort needed in

Allen Wrench

assembling a specific product (with 1 being

(Included)

easy and 5 being difficult). For some

products, two persons are recommended.

Phillips Screwdriver

(Not Included)

DIFFICULT

EASY

Page 1 of 5

Rev.14-03-11

Table of Contents

Do you have a question about the CM-AC293 and is the answer not in the manual?

Page 1 Assembly Instructions CM-AC293 ASSEMBLY RATING Tools Required for Assembly: The Assembly Rating is a 5-point system that shows the degree of effort needed in Allen Wrench assembling a specific product (with 1 being (Included) easy and 5 being difficult). For some products, two persons are recommended.
Page 2 Page 2 of 5...
Page 3 Before you begin, please read Page 2 of “Assembly and Care Advice”. And remember, do not tighten until each step is completed or instructed. Parts List Hardware List #1 x 1 pc #A x 20 pcs Left Stand Bolt 1/4”x1-1/4” #2 x 1 pc #B x 1 pc Right Stand...
Page 4 Align shelf A (#3) with the 2 pre-drilled holes towards the top of the left stand (#1). Step 1 II. Insert the two bolts (#A) through the two holes of shelf A (#3) and secure those bolts using the Allen wrench (#B) to lock them in with the left stand (#1).
Page 5 Carefully turn the completed unit upright. Make sure the unit Step 3 is rested on a flat surface and it does not feel loose or wobbly. If it does, double check that the bolts are secured and properly tighten. SECURING THE DISPLAY TO THE WALL #C x 2 pcs Step 4 #D x 2 pcs...