Specifications - Sunfire High Resolution Series User Manual

Specifications

Amplifier Output
1,000 watts rms
High Cut Filter
0 Hz - 100 Hz adjustable. The
crossover can be bypassed by rotating
the crossover frequency control fully
clockwise.
Frequency Response
HRS-8  Hz - 100 Hz
HRS-10 0 Hz - 100 Hz
HRS-1 18 Hz - 100 Hz
Power Line Voltage
10 VAC 50/60 Hz version
0 VAC 50/60 Hz version
Dimensions
HRS-8 10.0" (254 mm) cubed
HRS-10 11.5" (292.1 mm) cubed
HRS-12 13.5" (343 mm) cubed
Weight
HRS-8 28 lbs (12.7 kg)
HRS-10 34 lbs (15.4 kg)
HRS-12 38 llbs (17.2 kg)
Finish
High-gloss black cabinet, black anod-
ized amp plate, black fabric grill.
Line power consumption:
600 watts average, at maximum continu-
ous output, 18 to 100 Hz.
,000 watts peak, time limited basis.
Output levels:
Peak SPL (including room gain):
HRS-8 10 dB
HRS-10 105 dB
HRS-1 108 dB
16
Input sensitivity for full
output:
40 mVrms from left input with volume
control at 0 dB, 90 mVrms with volume
control fully clockwise.
0.48 Vrms from right input with volume
control at 0 dB, 180 mVrms with volume
control fully clockwise.
Input impedance:
0 KΩ for Line-Level inputs
5.6 KΩ for speaker or Hi-Level inputs
Drivers:
HRS-8 8" (203.2 mm)
HRS-10 10" (254 mm)
HRS-12 12" (304.8 mm)
Extra-large magnet and long throw
mechanical design yields very high
back-emf. The result is extraordinarily
high operating efficiency – that is, more
acoustic output for each watt of input.
Internal system gain:
4 dB from left input jack to subwoofer
with volume control at 0dB.
54 dB with control fully clockwise.
6 dB from right input jack to subwoofer
with volume control at 0dB,
48 dB with control fully clockwise.
© 2007 Sunfire Corporation.
All rights reserved. Sunfire Corporation
reserves the right to improve its products
at any time. Therefore, specifications are
subject to change without notice.
Manual 91-140-00 Rev B
User's Manual