Changing The Remote Control Batteries; Cleaning And Maintenance - Dometic Perfectview REC400 Installation And Operating Manual

Changing the remote control batteries

9.6 Resetting the SD card
You can reset the SD card in order to use it for other storage media.
➤ Connect the SD card to a PC using a card reader.
➤ Open the main menu of the software application "Car DVR".
➤ Click the
button.
➤ Select a memory card or a local data storage medium for the reset.
➤ Select the sub-item "Restore".
➤ Confirm by pressing "Yes".
➤ Click "Start" and "OK" to start the process.
➤ End the application using "OK" and "Close".
✓ The SD card can be used for other storage media.
10 Changing the remote control batteries
➤ Pull the cover off the lower end of the remote control.
➤ Replace the battery (3 V coin cell).
➤ Push the cover back in place.
11

Cleaning and maintenance

A
NOTICE!
Do not use sharp or hard objects or cleaning agents for cleaning as these
may damage the product.
➤ Occasionally clean the product with a damp cloth.
24
REC400
EN