Advertisement
Quick Links
A S S E M B LY I N S T R U C T I O N S
Ashley Vinyl Corner Picket Fence Kit
(40"W x 30"H)
Please read through before starting assembly.
IMPORTANT: CHECK THE INSIDE OF THE LARGER PIECES IN YOUR BOX FOR OTHER MATERIALS
PACKED INSIDE.
Check Box for These Contents
In the event of missing or defective parts please call our customer service department at 1 877 234 6196 (Mon. to Fri. 8:00 AM to 4:00 PM EST).
1. Post Caps (3)
2. Top Rail - Long (1) - 1 1/2" x 1 1/2" x 40 1/8"
3. Top Rail - Short (1) - 1 1/2" x 1 1/2" x 37"
4. Bottom Rail - Long (1) - 1 1/2" x 1 1/2" x 40 1/8"
5. Bottom Rail - Short (1) - 1 1/2" x 1 1/2" x 37"
6. Posts - Tall (1) - 7/8" x 1 1/2" x 36 3/4"
7. Posts - Short (2) - 7/8" x 1 1/2" x 30"
8. Pickets (16) - 1 - ¼" x 1½" x 26 1/8"
2 - ¼" x 1½" x 24 5/8"
3 - ¼" x 1½" x 23 1/4"
4 - ¼" x 1½" x 22 1/8"
5 - ¼" x 1½" x 21 1/4"
6 - ¼" x 1½" x 20 5/8"
7- ¼" x 1½" x 20 1/8"
8 - ¼" x 1½" x 20"
9. 3/4" Self-Auguring Stainless Steel Screw (12)
10. 2 1/2" Self-Auguring Stainless Steel Screw (2)
Tools You Will Need
• Cordless Drill
• Level
• Hammer
General Information
• Read Instructions through carefully before beginning assembly.
• When assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
• We recommend an area approx 5'x 8' for unobstructed assembling.
• You should not need to use excessive force when assembling components.
30 in
7 1/4 in
Ground
40 in
1
2
3
6
8
7
5
4
Zippity
DO-IT-YOURSELF
FRIENDLY PRODUCTS
4 3/4 in
23 1/4 in
13 1/2 in
2 in
9
10
Not to Scale
38 1/2 in
1
Ver 1.0/053015
Advertisement
Related Manuals for Zippity Ashley Vinyl Corner Picket Fence Kit
Summary of Contents for Zippity Ashley Vinyl Corner Picket Fence Kit
- Page 1 A S S E M B LY I N S T R U C T I O N S Zippity Ashley Vinyl Corner Picket Fence Kit DO-IT-YOURSELF FRIENDLY PRODUCTS (40”W x 30”H) 4 3/4 in 30 in 23 1/4 in...
- Page 2 S T E P O N E Assemble Full Panel Long Post Short Post Position the top and bottom long rails as illustrated and slide the one short and one tall post down thru the large routed holes in the rails until the pre-drilled holes in the post and rails are aligned.
- Page 3 S T E P T W O Pickets are identified 1, 2, 3, 4, 5, 6, 7 and 8 to create scallop pattern. Please insert in pattern as identified in illustration. Starting with the tallest picket, slide each one down thru the top rail and into the bottom rail.
- Page 4 S T E P T H R E E Assemble Partial Panel Position the top and bottom short rails as illustrated and slide the one short post down thru the large routed holes in the rails until the pre-drilled holes in the post and rails are aligned. Note the difference between the top and bottom rails.
- Page 5 S T E P F O U R Pickets are identified 1, 2, 3, 4, 5, 6, 7 and 8 to create scallop pattern. Please insert in pattern as identified in illustration. Starting with the tallest picket, slide each one down thru the top rail and into the bottom rail.
- Page 6 S T E P F I V E Fasten the Panels Together Bring the two panels together as shown (you might need a helper). Fasten the two panels together using the long screws provided through the pre-drilled holes as shown. A s h l e y Vi n y l C o r n e r P i c k e t F e n c e I n s t r u c t i o n s...
- Page 7 S T E P S I X Install fence into Ground Move the fence to its final location and identify the location of posts. Attempt to push the unit into the ground as illustrated Optionally: 1. If your ground is too hard, loosen the top 4” of the ground with a claw hammer as illustrated.
- Page 8 S T E P S I X Install fence into Ground - Continued Zippity DO-IT-YOURSELF FRIENDLY PRODUCTS Level the assembled unit and backfill and compact dirt around the base of each post to strengthen the unit. Finish the assembly by pushing the post caps down over the top of posts as illustrated.