Section 4. Maintenance - Nevir NVR-4422 CSD Manual

Table of Contents

Advertisement

Available languages

Available languages

3.5. Energy Saving Advice
Do not install the appliance close to sources of heat, such as a
cooker, dishwasher or radiator.
Locate the appliance in a cool well-ventilated room and make sure that the
air vents are clear.
Try to avoid keeping the door open for a long time, warm air will enter the
cabinet and may cause a buildup of ice as well as affecting the energy
consumption. Ensure there are no obstructions preventing the door from
closing properly.
Ensure that the door seal is clean and there are no tears or splits.
Ensure that the door seal is clean and there are no tears or splits.
Do not put hot food into the freezer – let it cool down first.
3.6. In the Event of a Power Failure
If there is a power failure, keep the door closed. When the power has been
restored the appliance will start to operate but it may take some time to achieve
the pre-set operating temperature. Check the condition of your stored food items
and liquids.

Section 4. Maintenance

Before any maintenance or cleaning work is carried out, DISCONNECT the
appliance from the ELECTRICITY supply.
4.1. Internal Cleaning
Clean the interior and accessories with warm water and bicarbonate of soda (5ml to
0.5 liters of water). Rinse and dry thoroughly. Do not use detergents, abrasive
powders, highly perfumed cleaning products, wax polishes or cleaning products
containing bleach or alcohol.
4.2. External Cleaning
Wash the outer cabinet with warm soapy water. Do NOT use abrasive products.
There may be sharp edges on the underside of the product, so care should be taken
when cleaning. Once or twice a year dust the rear of the appliance
compressor at the back of the appliance, with a brush or vacuum cleaner, as an
19
English
and the

Advertisement

Table of Contents
loading

Table of Contents