Section 1. Installation - Nevir NVR-4422 CSD Manual

Table of Contents

Advertisement

Available languages

Available languages

CONTENTS:

Section 1. Installation

Section 2. Safety Advice
Section 3. Operating the Appliance
Section 4. Maintenance
Section 5. Warning
Section 1. Installation
IMPORTANT! This appliance must be left to stand in an upright position for
at least 4 hours before being switched on for the first time.
This appliance has been designed for Domestic Use Only.
Remove all packaging and securing tape from the appliance.
Wash the interior of the appliance with luke warm water containing a
small amount of bicarbonate soda (5ml to 0.5 litres of water).
Position the appliance in a dry atmosphere and out of direct
sunlight.
Do not position next to a cooker or other sources of heat, i.e.
radiator.
If positioned next to another fridge or freezer, leave a minimum gap of 2cm
between the appliances in order to avoid condensation.
A clearance of 50mm should be left above the appliance. If this cannot be
achieved you should ensure a clearance of 25mm is maintained on each
side of the appliance.
15
English

Advertisement

Table of Contents
loading

Table of Contents