BMW 745I Owner's Manual page 91

Trip computer
Reset all data to zero:
Select "START / RESET" and confirm.
Time of departure
>
Driving time
>
Elapsed distance
>
Average fuel consumption since
>
"START / RESET"
Average speed since
>
"START / RESET".
Entering a distance manually
1. Select computer "BC"
2. Select and activate the "Distance" entry
function. Turn the controller to the left
or right to select the distance to your
destination
3. Press the controller to confirm your
entry.
Setting and revising speed limit
1.
2.
3.
4.
To switch off or switch on again
1.
2.
Adopting your current speed as the
limit
1.
2.
Online Edition for Part No. 01 41 0 157 197 - © 11/02 BMW AG
Select "Limit" and confirm your selec-
tion
Select "SET" and confirm.
Turn the controller to the left or right to
select the preset speed
Press the controller to confirm your
entry. The speed limit function is now
active.
Select "Limit" and confirm your selec-
tion
Select "ON / OFF" and confirm. "ON /
OFF" is highlighted when the speed
limit function is activated.
Select "Limit" and confirm your selec-
tion
Select and confirm. This resets
the stopwatch to zero and then restarts
it. The system adopts your current
speed as the limit.
89