BMW 745I Owner's Manual page 80

speed then displayed is stored and
reached on a clear road.
2 Desired speed store and decrease
Pull back the lever:
The current driving speed is rounded off to
the next 5-mile place (10 km/h), displayed
and stored.
Each time the lever is pulled back again,
the desired speed is decreased by another
5 mph (10 km/h) until the minimum speed
of 20 mph (30 km/h) is reached. The speed
then displayed is stored and reached on a
clear road.
3 Deactivate system
Press the lever up or down while the
system is active. The displays in the speed-
ometer disappear. You can use the system
again as required.
In addition, the system is deactivated auto-
matically:
when you apply pressure to the brake
>
pedal
when you select the automatic trans-
>
mission's neutral range N
when you deactivate the Dynamic Sta-
>
bility Control DSC
when you actuate the parking brake
>
during driving
when the system reduces the speed to
>
below 20 mph (30 km/h) due to a traffic
situation.
The system deactivates automatically
when the speed is set to below
20 mph (30 km/h). A gong sounds and a
message appears in the Check Control.
The active intervention of the driver is
required.<
Background lighting
You can switch off the background lighting
of the speedometer and tachometer
when you have deactivated the system
>
when the prewarning field in the
>
tachometer has gone out, refer to
page 82
78
Online Edition for Part No. 01 41 0 157 197 - © 11/02 BMW AG
when the destination guidance system
>
of the navigation system is deactivated.
Press the lever up or down for approx.
1 second.
4 Resume to stored desired speed
and distance setting
Press button 4:
The displays appear in the speedometer.
The system is reactivated and uses the last
stored desired speed and distance setting.
4 Fine adjustment of desired speed
In the activated state, the desired speed
increases by 1 mph (1 km/h) each time
button 4 is pressed briefly.
5 Select distance
You can choose from four distance steps.
Rotary switch upward:
>
Increase distance
Rotary switch downward:
>
Decrease distance.
The selected distance is displayed in the
speedometer.
Distance 1
Distance 2