Rear Air Conditioner - BMW 745I Owner's Manual

Select "Individual" and confirm. The AUTO
program is deactivated.
Particle/activated-charcoal filter
The particle filter removes dust and pollen
from the incoming air. The activated-char-
coal filter provides additional protection by
filtering gaseous pollutants from the out-
side air. Your BMW center replaces this
combined filter as a standard part of your
scheduled maintenance.
You can select a display of more detailed
information in the Service Interval Display,
refer to page 83.

Rear air conditioner*

The following settings and operating
modes can be selected and adjusted sep-
arately on the left and right sides:
1 Adjusting cooling, refer to next column
2 Maximum cooling, refer to next column
3 Adjusting air supply manually, refer to
next column
4 Switching off rear air conditioner, refer
to next column
Switching on rear air conditioner
To switch on the rear air conditioner
>
>
>
on automatically, refer to page
Adjusting cooling
start off, the system reaches and then
maintains the desired temperature settings
as quickly as possible, both in summer and
in winter.
Adjusting air supply manually
Maximum cooling
The system automatically switches to the
recirculated-air mode while a high-speed
stream of air simultaneously emerges from
the vent outlets. For this reason you should
ensure that these outlets are open before
selecting this program.
Switching off rear air conditioner
Press the button again to switch back on.
Online Edition for Part No. 01 41 0 157 197 - © 11/02 BMW AG
select maximum cooling
press the OFF button again
select "Rear air cond." in the Control
Display and confirm your selection, see
below.
When you switch on the rear air con-
ditioning, the rear cooler is switched
You can also set the system to
provide the desired level of
cooling by turning. We recom-
mend setting the system for
moderate cooling. When you
You can adjust the air supply by
turning.
This program quickly provides
maximum cooling.
The air conditioner is switched
off.
111
116.<