Maintenance - Qlima PGWH1010 User Manual

In case of any abnormal burning (smoke, yellow flame, unstable flame etc) stop
the use and contact your local dealer.
Do not touch any part of the Appliance during or short after use as the body
of the appliance might be hot. Only the turning knobs B and H and the on/off
button M.

MAINTENANCE

1. Switch off the appliance and close the valve on the gas container. Allow it to
cool down for at least 10 minutes before cleaning it.
2. Keep the appliance clean. Remove any dust and other dirt with a damp
cloth. Use regular cleaning products for stubborn stains. Clean the heater
thoroughly two times a year.
3. Inspect it each time before using it. Use a mixture of soapy water and water
to check the connections for leaks. If any bubbles occur, there is a leak. It
should be repaired immediately.
4. Check the hose / regulator connection each time before using it. If the hose
shows any sign of wear and tear or has any cracks, it should be replaced
immediately.
5. The appliance should be inspected by a certified service station once a year.
The appliance should not be installed and/or used in rooms.
6. The appliance maintenance operations necessary to enable it to be put back
into service after these devices have operated.
7. If this device or one of their parts are dismantled previously existing seals
shall be remade.
8. Only manufacturer's original parts should be used for replacements.
9. WARNING: The safety device shall not be put out of operation. Inappropriate
interference with the safety device can cause serious injuries and/or damage.
If you fail to consult and/or follow up the rules, instructions and explanation, the
warranty will no longer be valid, and the manufacturer will no longer deal with
any damage to the appliance and/or your environment under the warranty.
The use of this product and the elements required for that purpose is entirely at
the end user's own risk.
4
32