MFX Brackets & Accessories Table of contents | en Table of contents Important safety instructions Symbols Suspension Precautions Copyright and disclaimer Declaration of conformity System overview Brackets and accessories for MFX multi-function monitors Compatibility MFX brackets installation MFX brackets and rigging bar dimensions MFX-UB420 MFX-UB500 MFX-UB600...
en | Important safety instructions MFX Brackets & Accessories Important safety instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Clean only with a damp cloth. No harsh chemicals or solvents. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Only use rigging components with the loudspeaker models they are designed for. Any hardware not provided by Electro-Voice is the responsibility of others. Electro-Voice assumes no liability for any damage or personal injury resulting from improper use, installation, or operation of the product.
en | Important safety instructions MFX Brackets & Accessories All content including specifications, data, and illustrations in this manual are subject to change without prior notice. Declaration of conformity Bosch Security Systems Inc. 130 Perinton Pkwy, Fairport, NY 14450 USA Hereby declares conformity to the following standards: –...
MFX Brackets & Accessories MFX brackets installation | en MFX-UB420 The MFX-UB420 U-Bracket functions as a flying bracket or support yoke for the MFX-12MC in vertical orientation. Remove the (2) M10 screws on the sides of the loudspeaker. Remove the hand wheels screwed to the bracket.
Page 14
en | MFX brackets installation MFX Brackets & Accessories Tighten the hand wheels after tilting the loudspeaker to the desired position. 2020-01 | V01 | F.01U.382.753 Rigging manual...
MFX Brackets & Accessories MFX brackets installation | en MFX-UB500 The MFX-UB500 can function as: – U-Bracket for the MFX-12MC in horizontal orientation. – Flying bracket or support yoke for the MFX-15MC in vertical orientation. MFX-UB500 as U-Bracket for the MFX-12MC in horizontal orientation Remove the (2) M10 screws on the sides of the loudspeaker.
Page 16
en | MFX brackets installation MFX Brackets & Accessories Tighten the hand wheels after tilting the loudspeaker to the desired position. MFX-UB500 as a flying bracket or support yoke for the MFX-15MC in vertical orientation Remove the (2) M10 screws on the sides of the loudspeaker.
Page 17
MFX Brackets & Accessories MFX brackets installation | en Insert the (2) hand wheels through the bracket and into the loudspeaker. Tighten the hand wheels after tilting the loudspeaker to the desired position. Rigging manual 2020-01 | V01 | F.01U.382.753...
en | MFX brackets installation MFX Brackets & Accessories MFX-UB600 The MFX-UB600 functions as a U-Bracket for the MFX-15MC in horizontal orientation. Remove the (2) M10 screws on the sides of the loudspeaker. Remove the hand wheels screwed to the bracket.
MFX Brackets & Accessories MFX brackets installation | en MFX-RB-B The MFX-RB-B functions as a rigging bar for the MFX loudspeaker and comes with 7 separate aiming angles. Remove the M10 screw on the top of the loudspeaker. Align the rigging bar with the loudspeaker. Insert the hand wheel of the rigging bar through the M10 hole of the loudspeaker.
Page 20
en | MFX brackets installation MFX Brackets & Accessories Determining aiming angles with the MFX rigging bar Hole number MFX-12MC MFX-15MC 19.5° 15.6° 13.3° 9.8° 3.5° 4.0° 0° -1.8° -7.05° -7.7° -13.7° -13.2° -20.3° -18.9° 2020-01 | V01 | F.01U.382.753 Rigging manual...
MFX Brackets & Accessories MFX accessories installation | en MFX accessories installation TC-02 Truss clamp The TC-02 Truss clamp is used to attach a bracket to a truss, or the loudspeaker directly to a truss. To attach the TC-02 Truss clamp to the bracket you need the following included hardware: –...
en | MFX accessories installation MFX Brackets & Accessories PCL-M10 The PCL-M10 is an adapter with a 35mm pole mount Receptacle and an M10 threaded screw attachment. It can be attached to brackets or the speaker directly and then mounted on a speaker stand or pole.
MFX Brackets & Accessories MFX accessories installation | en FB-TV Flight Bracket TV Stud The FB-TV Flight Bracket TV Stud is used to provide a quick-release connection to other TV Stud accessories. To attach the FB-TV Stud to the bracket you need the following included hardware: –...
en | MFX accessories installation MFX Brackets & Accessories TC-TV Truss Clamp TV Stud The TC-TV Truss Clamp TV Stud has a quick release feature and is used together with the FB- TV Flight Bracket TV Stud. Slide the TC-TV clamp onto the FB-TV stud. Insert the safety pin through the lock hole and secure it by swiveling the lock tab 90°...
MFX Brackets & Accessories MFX accessories installation | en PM-TV Pole Mount TV Stud The PM-TV Pole Mount TV Stud is an adapter with a 35mm pole mount Receptacle with an M10 locking screw and an FB-TV stud attachment. It can be attached to the FB-TV Stud and mounted on a speaker stand or pole with an M10 locking screw.
en | Secondary Safety MFX Brackets & Accessories Secondary Safety In addition to the primary means of mounting or suspension, all loudspeaker cabinets, arrays, or clusters must be securely attached to an independent, secondary means of suspension using rigging components with correct and appropriate load ratings. The secondary safety system should connect the loudspeaker system, bracket or flying grid to a unique anchor or fly point that is mechanically separate from that used by the primary suspension.