Advertisement
Quick Links
Key Features:
• Stainless steel mounting kit for Sx100/300 se-
ries speaker systems
• May be used in conjuction with OmniMount®
Series 100 support system
• Versatile design allows the speaker to be aimed
at any angle from wall or ceiling
• Provides a rigid frame for flying one or two
speakers
• Recommended for use with Sx300PI and
Sx300PIX
General Description:
The Electro-Voice® MBS200 mounting bracket kit consists of a
stainless steel U-bracket, two M8 x 1.25" hex-head bolts, four
lock washers, two friction pads, and two 3/8"-24 hex-head bolts
(see the Parts List on Page 2). The kit is designed to accom-
modate the installation of Sx100/300 series speaker systems in
a variety of ways.
Wall or Ceiling Mounting
The robust design of the MBS200 installation bracket allows an
Sx100/300 series speaker system to be mounted in almost any
position to obtain the desired sound coverage (see Figure 3).
Flying Installations
The MBS200 bracket "captures" the speaker in a rigid frame
which has structurally sound locations for attaching rigging
hardware. These attachment points are four 12.7mm (1/2")
diameter holes located on the ends of the bracket. A 3/8" "quick
link" (or similar hardware) can be readily connected to each
attachment point. Sx100/300 series speaker systems can be
flown individually in either a horizontal or vertical position, or
two speakers can be flown together in a vertical position (see
Figures 4 and 5).
1
Stainless Steel
Mounting Bracket Kit
Technical Specifications:
Wall/Ceiling
Three in-line 8mm (5/16") diameter clearance
Mounting Holes:
holes, centers spaced 20.3cm (8.0") apart
Enclosure
Two 8mm (5/16") diameter clearance holes, on
Mounting Holes:
the ends of the bracket
Material: 10-Gauge 316 Stainless Steel
Finish: MBS200 - Black Powder Coat
MBS200-W - White Powder Coat
MBS200-U - Natural Finish Stainless Steel
Parts Supplied: (1) U-Bracket
(2) M8 x 1.25" Hex Head Bolts
(2) 3/8"-24 Hex Head Bolts
(2) 5/16" Split Ring Lock Washers
(2) 3/8" Split Ring Lock Washers
(2) Friction Washers
Dimensions: 632mm x 276mm x 94mm
(24.90" x 10.87" x 3.69")
Net Weight: 3.40 kg (7.50 lb)
Shipping
3.83 kg (8.44 lb)
Weight:
MBS200
Advertisement
Related Manuals for Electro-Voice MBS200
Summary of Contents for Electro-Voice MBS200
-
Page 1: Technical Specifications
The Electro-Voice® MBS200 mounting bracket kit consists of a Wall/Ceiling Three in-line 8mm (5/16”) diameter clearance stainless steel U-bracket, two M8 x 1.25” hex-head bolts, four Mounting Holes: holes, centers spaced 20.3cm (8.0”) apart lock washers, two friction pads, and two 3/8”-24 hex-head bolts (see the Parts List on Page 2). The kit is designed to accom- Enclosure Two 8mm (5/16”) diameter clearance holes, on Mounting Holes: the ends of the bracket modate the installation of Sx100/300 series speaker systems in a variety of ways. Material: 10-Gauge 316 Stainless Steel Finish: MBS200 - Black Powder Coat Wall or Ceiling Mounting MBS200-W - White Powder Coat The robust design of the MBS200 installation bracket allows an MBS200-U - Natural Finish Stainless Steel Sx100/300 series speaker system to be mounted in almost any Parts Supplied: (1) U-Bracket position to obtain the desired sound coverage (see Figure 3). (2) M8 x 1.25” Hex Head Bolts (2) 3/8”-24 Hex Head Bolts Flying Installations (2) 5/16” Split Ring Lock Washers The MBS200 bracket “captures” the speaker in a rigid frame (2) 3/8” Split Ring Lock Washers which has structurally sound locations for attaching rigging (2) Friction Washers hardware. These attachment points are four 12.7mm (1/2”) - Page 2 8. Gently tighten the M8 bolts until the speaker will no longer 8. Position the speaker for the desired coverage and gently rotate. DO NOT OVERTIGHTEN. tighten the M8 bolts until the speaker will no longer rotate. DO NOT OVERTIGHTEN. NOTE: The 3/8-24 bolts (D) are used to lock the speaker parallel to the bracket and prevent it from being rotated. This is needed when arraying the speaker for proper alignment and when flying in the vertical position. Fig. 1 - Attaching the MBS200 Bracket to Sx100/300 Series Speaker Systems Item Part Number Qty Description PAR000362 U-Bracket FST000071-000 M8 x 1.25” Hex Head Bolt HDW000012-000 5/16” Split Ring Lock Washer FST000070-000 3/8”-24 Hex Head Bolt...
- Page 3 LOCATED ON BOTH SIDES AND BACK (203 mm) (203 mm) 2.75 in. (70 mm) 0.33 in. (8 mm) 5.0 in. (127 mm) Fig. 3 - Wall-Mounting an Sx100/300 Series Speaker Sys- tem using the MBS200 Mounting Bracket WARNING: Suspending any object is potentially dangerous and should be attempted only by individuals who have a thorough knowl- edge of the techniques and regulations of rigging objects overhead. Electro-Voice sanctions suspending the Sx100/300 series speaker systems only when all current national, federal, state and local regulations are taken into account. When the...
- Page 4 LOCK WASHER CORRECT Fig. 5a - Vertical Suspension of an Sx100/300 Series Fig. 5b - Vertical Suspension of Two Sx100/300 Series Speaker System using the MBS200 Mounting Bracket Speaker Systems using the MBS200 Mounting Bracket U.S.A. and Canada only. For customer orders, contact Customer Service at: 800/392-3497 Fax: 800/955-6831 Europe, Africa, and Middle East only. For customer orders, contact Customer Service at:...